Using the Find, Go To X,Y and Measure Tools in ArcView 9 - ArcMap

Geospatial Technology September 28, 2011 Print Friendly and PDF

Using the Find, Go To X,Y and Measure Tools in ArcView 9x

1. Select the Measure tool.

image description


2. Choose the “Measure an Area” feature to determine the area of an irregular area. Use the left mouse to locate a start area and then continue to click at points around an area.

image description

Double-click to close the area. Set the area units to “Acres.”

3. Select the “Go To X,Y” tool

image description


4. Enter a desired longitude and latitude in the “Go To X,Y” window.

image description

5. Select the “Find” tool.

image description

6. Enter a “Place Name,” choose the appropriate “Place Type.” and select “Find.”

image description

a) Right-click on the search result and choose “Pan to.”


John Nowatzki - Ag & Biosystems Engineering Department
North Dakota State University, Fargo, ND 58105
Telephone 701-231-8213
John.Nowatzki@ndsu.nodak.edu
10-2007

Connect with us

  • Twitter
  • Facebook
  • YouTube
  • Pinterest

Welcome

This is where you can find research-based information from America's land-grant universities enabled by eXtension.org

LOCATE

USDA / NIFA

This work is supported by the USDA National Institute of Food and Agriculture, New Technologies for Ag Extension project.